NoTrax 130 Sabre™ Vinyl Backed Entrance Mat 4' x 6' - Non-Slip Floor Mat for Home, Office, School & Commercial Use - Charcoal Grey - Perfect for High Traffic Areas, Entrances & Mudrooms

Better #130 Sabre Decalon entrance mat Designed for use in light to medium foot traffic areas, Sabre's’ durable Decalon fibers provide moisture and dirt retention at entrances and passageways; reducing slip hazards and floor care maintenance. Sabre is a step above the commodity entrance mat and is intended for all medium traffic areas including entrances and lobbies. A vinyl non-slip backing helps to minimize mat movement. Test - Test Description - Results: (1) Abrasion Resistance ASTM D3884-01 - Test specimen is subjected to the rubbing action of two abrading wheels under controlled conditions. Results measured in weight loss (Grams) - 1. 17. (2) Accelerated Wear - Test specimen is subjected to the action of rollers under a specified load. Sample is rotated 10 degree after each pass. Results measured in thickness loss (percent) - 32. 30 percent. (3) Accelerated Soiling ASTM D6540-00 - Test specimen is subjected to an accelerated soiling process. for a predetermined length of time. The sample is vacuumed, rated, submitted to an extraction device, then rated again. - (Based on visual inspection) 3 - Vacuum Rating 5 - Rating After Extraction. (4) Water Retention - Test specimen is submerged in water for 5 minutes, removed, drained for 15 seconds and weighed. Results measured in weight gain. (Gallons per square yard) - 0. 42. Flammability ASTM D2859 (CPSC FF 1-70) - Intended to measure the mattings response to an ignition source in a controlled environment. The uncharred area of the test specimen must be greater than 1 inch to pass. - 3. 6 inches. All testing of NoTrax floor matting has been performed by an independent testing laboratory. Available in charcoal color.

A tufted cut-pile Decalon construction that is a step above the commodity entrance mat

Vinyl backing helps reduce mat movement

Face weight 19 oz. per square yard

Overall thickness 5/16" to perform in narrow clearance doorways

Use for indoor - entranceways, lobbies, all light to medium traffic areas